Original V4.7.8 Xhorse VVDI PROG Programmer

Original V4.7.8 Xhorse VVDI PROG Programmer

The built-in update software allows user to update VVDI Prog firmware timely.
High-speed USB communication interface enable the software automatically connect.
Smart operation mode: the possible causes of error will be listed
Reserve ports: for future update.
The self-test function enable you check if the machine works well.
Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.

offer top quality Original V4.7.8 Xhorse VVDI PROG Programmer

Wholesale Top quality BENZ ECOM DoIP Diagnostic and Programming Tool, Super DSP3+ Odometer Correction Tool, VAS 5054A ODIS GM Tech2, Scania VCI3

images of Original V4.7.8 Xhorse VVDI PROG Programmer

VVDI PROG Programmer


Top 8 Reasons to Get VVDI Prog V4.7.8:
  1. Support R&W lots of chips, include MC9S08 series, MC68HC(9)12 series,MC9S12 series, V850 series, H8X series, R8C series, PCF79XX series and most eeprom chips
  2. Support chip data verify, check blank function
  3. Support data file compare function
  4. Support R&W BMW N20, N55 ECU ( show ISN directly )
  5. Stable R&W MC9S12XE series chips (5M48H/1N35H/2M53J/3M25J etc.)
  6. Support renew PCF79XX remote, currently support BMW E/F series
  7. Lots of connection diagram
  8. Support Multi-language now: English, Arabic, Czech, French, Italian, Polish, Portuguese, Russian, Spanish, Turkish & Chinese Simplified
Buy VVDI-Prog programmer, get free BMW ISN read function and NEC, MPC, Infineon etc chip continously update service

Latest Software Version: V4.5.9

VVDI Prog V4.5.9 (2017-06-28)

* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.9 version in Doc folder
* Update polish language
+ Update V850 D-Flash format conversion tool
* Fix STM8 series options error
* Fix MED17.1 option error
* Fix V850E-DG3 diagram error
* Fix ME17.9.11.1 diagram error
* Fix BAOJUN630 diagram error
+ Add MPC5606B, MPC5607B, MPC5602D, MPC5606E, MPC5601P, MPC5602S, MPC5604S options
in <2-MCU>->
+ Add SPC560B50B2, SPC560B64L3, SPC560C40L1, SPC560C50L1, SPC56AP54L3, SPC56AP54L5,
SPC56AP60L3, SPC56AP60L5 options in <2-MCU>->
+ Add MT60(TC1766) option in <3-ECU>->
+ Add V3 diagram in <3-ECU>->->
+ Add KESSY(2008--) option in <4-IMMOBILIZER>->
(Need to use with VVDI2,support Touareg, Bentley, A8, Cayenne, Phaeton with KESSy module (IMMO4 system) after 2008)
+ Add XC60-REVIEW-MIRROR option in <4-IMMOBILIZER>->
+ Add SENOVA-D70 option in <5-DASHBORAD>->
+ Add EXCELLEGT option in <5-DASHBORAD>->
+ Add AVEO option in <5-DASHBORAD>->
+ Add FIESTA option in <5-DASHBORAD>->
+ Add K5(2017) option in <5-DASHBORAD>->
+ Add FREELANDER(2004) option in <5-DASHBORAD>->
+ Add MG3(2016) option in <5-DASHBORAD>->
+ Add EXCELLEGT-SRS option in <7-ARIBAG>->
+ Add ALSVIN-SRS option in <7-ARIBAG>->
+ Add CITY-SRS(MPC5604P) option in <7-ARIBAG>->
+ Add 2008-SRS option in <7-ARIBAG>->
+ Add SRS-VW20LE(SPC560P50L3) option in <7-ARIBAG>->
+ Add A4L-LWR-MODULE(2010), A6L-C6-AMP, A8L-AMB-MODULE(2011), ESL-HC08GR16-V2 options in <8-OTHER>->
+ Add 528-SEAT-MODULE option in <8-OTHER>->


Firmware Version: 1.2.2


VVDI Prog V4.5.8 (2017-05-25)
* This version DON’t need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.8 version in Doc folder
+ Add Arabic, Czech, Spanish,French, Italian, Portuguese,Russian, Turkish, support select in Language option
+ Add MPC5602BxLH, MPC5602BxLL, MPC5602BxLQ, MPC5603BxLH, MPC5603BxLL, MPC5603BxLQ, MPC5604B,
MPC5602CxLH, MPC5602CxLL, MPC5603CxLH, MPC5603CxLL, MPC5604C, MPC5604E, MPC5602P,MPC5603P,
MPC5604P options in <2-MCU>->
+ Add SPC560B40L1, SPC560B40L3, SPC560B40L5, SPC560B50L1, SPC560B50L3, SPC560B50L5, SPC560B54L3,
SPC560B54L5, SPC560B60L3, SPC560B60L5, SPC560B60L7, SPC560B64L5, SPC560B64L7, SPC560C40L3,
SPC560C50L3, SPC560D30L1, SPC560D30L3, SPC560D40L1, SPC560D40L3, SPC560P44L3, SPC560P44L5,
SPC560P50L3, SPC560P50L5, SPC560P54L3, SPC560P54L5, SPC560P60L3,
SPC560P60L5 options in <2-MCU>->
+ Add ME7.9.7.1 option in <3-ECU>->
+ Add DODGE-JOURNEY-WIN(2010) option in <4-IMMOBILIZER>->
+ Add CS10-IMMO option in <4-IMMOBILIZER>->
+ Add T70-IMMO option in <4-IMMOBILIZER>->
+ Add B40, E130, SENOVA-D50 options in <5-DASHBORAD>->
+ Add BORGWARD(2017) option in <5-DASHBORAD>->
+ Add ALSVIN-V3(2012), CS35(2015), CX20(2012), HONOR, OUSHANG(2017),
RAETON(2013) options in <5-DASHBORAD>->
+ Add FXAUTO-LZ, VENUCIA-D50 options in <5-DASHBORAD>->
+ Add CS10 option in <5-DASHBORAD>->
+ Add QUEST(2006) option in <5-DASHBORAD>->
+ Add BESTURN-X80 option in <5-DASHBORAD>->
+ Add BAOJUN630, BAOJUN630(2015), BAOJUN730, MG6,
SGMW-RONGGUANG options in <5-DASHBORAD>->
+ Add POLO option in <5-DASHBORAD>->
+ Add S80(2009) option in <5-DASHBORAD>->
+ Add H330 option in <5-DASHBORAD>->
+ Add DOMY-X5(2015),T600(2015), Z500(2015) option in <5-DASHBORAD>->
+ Add RIICH-M1-SRS option in <7-ARIBAG>->
+ Add BESTURN-B70-SRS option in <7-ARIBAG>->
+ Add ECOSPORT-SRS, ESCORT-SRS options in <7-ARIBAG>->
+ Add DISCOVERY4-SRS option in <7-ARIBAG>->
+ Add LOVA-SRS option in <7-ARIBAG>->
+ Add DKG-MODULE(2008) option in <8-OTHER>->
+ Add GL8-KG-MODULE option in <8-OTHER>->
+ Add RAETON-HVAC-MODULE(2013), RAETON-KG-MODULE(2013) options in <8-OTHER>->
+ Add CRUZE-CD-PLAYER option in <8-OTHER>->
+ Add FENGGUANG580-KG-MODULE option in <8-OTHER>->
+ Add FOCUS-BCM option in <8-OTHER>->
+ Add HVAC-MODULE(2015), HAVAL-H9-4WD-MODULE options in <8-OTHER>->
+ Add IX35-ASSY-SMARTKEY-UNIT option in <8-OTHER>->
+ Add RUIYI-KG-MODULE(2009) option in <8-OTHER>->
+ Add GOLF6-PDC-MODULE, MAGOTAN-EPB-MODULE(2013), NEW-JETTA-PDB-MODULE,
NEW-SANTANA-PDB-MODULE options in <8-OTHER>->

VVDI Prog V4.5.7 Update Plan: VVDI Prog v4.5.7 (2017-04-24) * This version DON't need update firmware

* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.8
version in Doc folder
* Fix some MC68HC(9)08 read error
problem
* Fix PIC12F(16F) diagram error
problem
+ Add TC1762-CAN,
TC1766-CAN options
in <2-MCU>->
+ Add STM8AF5179,
STM8AF5268, STM8AF5269, STM8AF5286, STM8AF5288, STM8AF5289, STM8AF528A, STM8AF52A6, STM8AF52A8, STM8AF52A9, STM8AF52AA, STM8AF6168, STM8AF6213, STM8AF6223, STM8AF6223A, STM8AF6246, STM8AF6248, STM8AF6266, STM8AF6268, STM8AF6269, STM8AF6286, STM8AF6288, STM8AF6289, STM8AF628A, STM8AF62A6, STM8AF62A8, STM8AF62A9, STM8AF62AA, STM8AL3136, STM8AL3138, STM8AL3146, STM8AL3148, STM8AL3166, STM8AL3168, STM8AL3188, STM8AL3189, STM8AL318A, STM8AL31E88, STM8AL31E89, STM8AL31E8A, STM8AL3LE88, STM8AL3LE89, STM8AL3LE8A, STM8AL3L46, STM8AL3L48, STM8AL3L66, STM8AL3L68, STM8AL3L88, STM8AL3L89, STM8AL3L8A, STM8L051F3, STM8L052C6, STM8L052R8, STM8L101F1, STM8L101F2, STM8L101F3, STM8L101G2, STM8L101G3, STM8L101K3, STM8L151C2, STM8L151C3, STM8L151C4, STM8L151C6, STM8L151C8, STM8L151F2, STM8L151F3, STM8L151G2, STM8L151G3, STM8L151G4, STM8L151G6, STM8L151K2, STM8L151K3, STM8L151K4, STM8L151K6, STM8L151M8, STM8L151R6, STM8L151R8, STM8L152C4, STM8L152C6, STM8L152C8, STM8L152K4, STM8L152K6, STM8L152K8, STM8L152M8, STM8L152R6, STM8L152R8, STM8L162R8, STM8L162M8, STM8S003F3, STM8S003K3, STM8S003C6, STM8S003K6, STM8S007C8, STM8S103F2, STM8S103F3, STM8S103K3, STM8L105C4, STM8L105C6, STM8L105K4, STM8L105K6, STM8L105S4, STM8L105S6, STM8S207C6, STM8S207CB, STM8S207K6, STM8S207K8, STM8S207M8, STM8S207MB, STM8S207R6, STM8S207R8, STM8S207RB, STM8S207S6, STM8S207S8, STM8S208C6, STM8S208C8, STM8S208MB, STM8S208R8, STM8S208RB, STM8S903F, STM8S903K options
in <2-MCU>->
+ Add ME17.9.11.1(TC1762) option
in <3-ECU>->
+ Add MED17.1(TC1766) option
in <3-ECU>->
+ Add EIS-W639(1J35D),
EIS-W639(3K85K),
EIS-W639(4J74Y) options
in <4-IMMOBILIZER>->
+ Add JIEFANG-J6-HCS300 option
in <4-IMMOBILIZER>->
* Change JIEFANG-J6-BCM option
(Support up to 5 remotes)
+ Add SENOVA-D60 option
in <5-DASHBORAD>->
+ Add EADO option
in <5-DASHBORAD>->
+ Add TRUMPCHI-GS4 option
in <5-DASHBORAD>->

VVDI PROG V4.5.6 (2017-03-21) *This version don't need update firmware:

* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.6
version in Doc folder
+ Support operate software while
opening the diagram
* Fix MC9S12G192,
MC9S12GA19,
MC9S12G240,
MC9S12GA240 options
PFLASH write error problem
+ Add PIC12F635,
PIC12F683 options
in <2-MCU>->

+ Add PIC16F631,
PIC16F636,
PIC16F639,
PIC16F677,
PIC16F684,
PIC16F685,
PIC16F687,
PIC16F688,
PIC16F689,
PIC16F690 options
in <2-MCU>->

+ Add JIEFANG-J6-BCM option
in <4-IMMOBILIZER>->
(Need to use with VVDI2)
+ Add FC-OPERATION-UNIT-W221
option in <8-OTHER>->

VVDI PROG Latest Software Version V4.5.2 Update (2016-11-25)
v4.5.2 (2016-11-25)
* This version DON't need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.1
version in Doc folder
+ Add AB28F200B5T(PSOP44),
AB28F200B5B(PSOP44),
AB28F400B5T(PSOP44),
AB28F400B5B(PSOP44),
AB28F800B5T(PSOP44),
AB28F800B5B(PSOP44)options
in <1-EEPROM&FLASH>->
(Need the TB28FXXX adapter)
+ Add HC908GR4,
HC908GR8,
HC908LJ12,
HC908LJ24,
HC908GR4_SECURED,
HC908GR8_SECURED,
HC908LJ12_SECURED,
HC908LJ24_SECURED options
in <2-MCU>->

+ Add MC9S08JM8_UNSECURED,
MC9S08JM16_UNSECURED,
MC9S08JM32_UNSECURED,
MC9S08JM60_UNSECURED options
in <2-MCU>->
+ Add [V850ES/FE3]series:
D70F3623 option
[V850ES/FF3]series:
D70F3626 option
[V850ES/FG3]series:
D70F3627,
D70F3629,
D70F3630 options
[V850ES/FJ3]series:
D70F3631,
D70F3632,
D70F3633,
D70F3634,
D70F3635 options
[V850ES/FK3]series:
D70F3636,
D70F3637,
D70F3638 options
in <2-MCU>->

+ Add BCM3 option
in <4-IMMOBILIZER>->
+ Add XIAOKANG(2015) option
in <5-DASHBORAD>->
+ Add SAICMAXUS-RV(2015) option
in <5-DASHBORAD>->
+ Add <7-ARIBAG> option in TYPE
+ Add GL8-SRS(2015) option
in <7-ARIBAG>->
+ Add MAKKA-SRS(2015) option
in <7-ARIBAG>->
+ Add VW52-SRS-V2 option
in <7-ARIBAG>->

v4.5.1 (2016-10-24)
* This version DON't need update
firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.1
version in Doc folder
* Fix MC68HC908 series write FLASH
problem
+ Add MB91F037,
MB91F061,
MB91F062 options
in <2-MCU>->

+ Add [V850E2/DK4]series:
D70F3529 option
[V850E2/FG4]series:
D70F3548,
D70F3549,
D70F3550,
D70F4000,
D70F4001,
D70F4002 options
[V850E2/FJ4]series:
D70F3551,
D70F3552,
D70F3553,
D70F3554,
D70F4003,
D70F4004,
D70F4005,
D70F4006 options
[V850E2/FK4]series:
D70F3555,
D70F3556,
D70F3557,
D70F3558,
D70F3592,
D70F4007,
D70F4008,
D70F4009,
D70F4010 options
[V850E2/FL4]series:
D70F3559,
D70F3560,
D70F4011,
D70F4012 options
[V850E2/FK4-H]series:
D70F3561 options
[V850E2/FL4-H]series:
D70F3564 options
[V850E2/FE4-L]series:
D70F3570,
D70F3571,
D70F3572 options
[V850E2/FF4-L]series:
D70F3573,
D70F3574,
D70F3575 options
[V850E2/FG4-L]series:
D70F3576,
D70F3577,
D70F3578,
D70F3579,
D70F3580 options
[V850E2/FJ4-L]series:
D70F3582,
D70F3583,
D70F3584,
D70F3585 options
in <2-MCU>->

+ Add DISCOVER3-CEM,
RANGE-ROVER-SPORT-CEM options
in <4-IMMOBILIZER>->
+ Add BIG7-ICU(HC908GZ32) option
in <4-IMMOBILIZER>->
+ Add SRS(2016) option
in <8-OTHER>->

VVDI PROG Latest Software Version V4.5.0 Update (2016-09-26)

* This version DON't need update firmware
* Fix some bugs
+ Add VVDI PROG USER MUNUAL 4.5.0 version in Doc folder
* Fix ATMEGAxx8 diagram error problem
* Change D70f3624 diagram(add QFP64 package)
+ Add ATMEGA48P,ATMEGA48PB, ATMEGA88P,ATMEGA88PB, ATMEGA163,ATMEGA164,
ATMEGA164P, ATMEGA168P,ATMEGA168PB, ATMEGA169P,ATMEGA323,ATMEGA324, ATMEGA324P,
ATMEGA324PB, ATMEGA325, ATMEGA325P, ATMEGA3250, ATMEGA3250P, ATMEGA328, ATMEGA328P,
ATMEGA328PB, ATMEGA329, ATMEGA329P,ATMEGA3290, ATMEGA3290P,ATMEGA644, ATMEGA644P,
ATMEGA645, ATMEGA645P, ATMEGA6450, ATMEGA6450P, ATMEGA649, ATMEGA649P, ATMEGA6490,
ATMEGA6490P, ATMEGA103, ATMEGA1284, ATMEGA1284P optionsin <2-MCU>->
+ Add HC908GZ8,HC908GZ16, HC908GZ32,HC908GZ48,HC908GZ60,HC908GZ8_SECURED,HC9 08GZ16_SECURED,
HC908GZ32_SECURED,HC908GZ48_SECURED,HC908GZ60_SECU RED options in <2-MCU>->
+ Add MC912DT128_UNSECURED,MC912DT128A_UNSECURED,MC912DT 128P_UNSECURED,MC912DT128_SECURED,
MC912DT128A_SECURED,MC912DT128P_SECURED optionsin <2-MCU>->
+ Add MT20U2-MC912DT128P option in <3-ECU>->
+ Add BESTURN-B90-BCM option in <4-IMMOBILIZER>->
+ Add FENGGUANG(2016) option in <5-DASHBORAD>->
+ Add XC60-HIGH-EQUIPPED(2014) option in <5-DASHBORAD>->

v4.4.9 (2016-09-01)


v4.4.8 (2016-08-01)

* This version DON't need update firmware
* Fix some bugs (write or erase operation prompt device error problem)

v4.4.6 (2016-06-23)
* This version DON't need update firmware
* Fix some bugs
* Fix Chrysler 300C IMMO diagram error
+ Add VVDI PROG USER MUNUAL 4.4.6 version in Doc folder
+ Add MC68HC(9)08_MASK_ID.cfg file in software folder, list the corresponding MC68HC(9)08 seires chip type of MASK ID
+ Add HC08AB16A_EEP,
HC08AS20_EEP,
HC08AS32_EEP,
HC08AS32A_EEP,
HC08AZ0_EEP,
HC08AZ16_EEP,
HC08AZ24_EEP,
HC08AZ32_EEP,
HC08AZ32A_EEP,
HC08AZ48_EEP,
HC08AZ48A_EEP,
HC08AZ60_EEP,
HC08AZ60_EEP(1J35D),
HC08AZ60A_EEP,
HC908AB32_EEP,
HC908AS32A_EEP,
HC908AS60_EEP,
HC908AS60A_EEP,
HC908AZ32A_EEP,
HC908AZ60_EEP,
HC908AZ60_EEP(4J74Y),
HC908AZ60A_EEP,
HC908AZ60E_EEP,
HC08AS20_EEP_SECURED,
HC08AS32_EEP_SECURED,
HC08AS32A_EEP_SECURED,
HC08AZ0_EEP_SECURED,
HC08AZ16_EEP_SECURED,
HC08AZ24_EEP_SECURED,
HC08AZ32_EEP_SECURED,
HC08AZ32A_EEP_SECURED,
HC08AZ48_EEP_SECURED,
HC08AZ48A_EEP_SECURED,
HC08AZ60_EEP_SECURED,
HC08AZ60A_EEP_SECURED,
HC908AB32_EEP_SECURED,
HC908AS32A_EEP_SECURED,
HC908AS60_EEP_SECURED,
HC908AS60A_EEP_SECURED,
HC908AZ32A_EEP_SECURED,
HC908AZ60_EEP_SECURED,
HC908AZ60A_EEP_SECURED,
HC908AZ60E_EEP_SECURED options
in <2-MCU>->

+ Add MC9S08GW32_UNSECURED,
MC9S08GW64_UNSECURED,
MC9S08JE64_UNSECURED,
MC9S08JE128_UNSECURED,
MC9S08LC36_UNSECURED,
MC9S08LC60_UNSECURED,
MC9S08LH36_UNSECURED,
MC9S08LH64_UNSECURED,
MC9S08LL8_UNSECURED,
MC9S08LL16_UNSECURED,
MC9S08LL36_UNSECURED,
MC9S08LL64_UNSECURED,
MC9S08MM32_UNSECURED,
MC9S08MM32A_UNSECURED,
MC9S08MM64_UNSECURED,
MC9S08MM128_UNSECURED,
MC9S08QB4_UNSECURED,
MC9S08QB8_UNSECURED,
MC9S08QE4_UNSECURED,
MC9S08QE8_UNSECURED,
MC9S08QE16_UNSECURED,
MC9S08QE32_UNSECURED,
MC9S08QE64_UNSECURED,
MC9S08QE96_UNSECURED,
MC9S08QE128_UNSECURED,
MC9S08RC8_UNSECURED,
MC9S08RC16_UNSECURED,
MC9S08RC32_UNSECURED,
MC9S08RC60_UNSECURED,
MC9S08RC8_UNSECURED,
MC9S08RC16_UNSECURED,
MC9S08RC32_UNSECURED,
MC9S08RC60_UNSECURED,
MC9S08RD8_UNSECURED,
MC9S08RD16_UNSECURED,
MC9S08RD32_UNSECURED,
MC9S08RD60_UNSECURED,
MC9S08RE8_UNSECURED,
MC9S08RE16_UNSECURED,
MC9S08RE32_UNSECURED,
MC9S08RE60_UNSECURED,
MC9S08RG32_UNSECURED,
MC9S08RG60_UNSECURED options
in <2-MCU>->
+ Add EIS-W203(1J35D),
EIS-W203(1J74Y),
EIS-W203(2J74Y),
EIS-W203(3J74Y),
EIS-W203(4J74Y),
EIS-W220(W215)(1J35D),
EIS-W220(W215)(1J74Y),
EIS-W220(W215)(2J74Y),
EIS-W220(W215)(3J74Y),
EIS-W220(W215)(4J74Y),
EIS-W639(0L02M),
EIS-W639(1L02M),
EIZ-W203(HC12),
EIZ-W209(HC12),
EIZ-W211(HC12),
EIZ-W219(HC12),
EIZ-W220(HC12),
EIZ-W230(HC12),
EIZ-W169(ST12) options
in <4-IMMOBILIZER>->
+ Add RANGE-ROVER-EWS(2004-08) option
in <4-IMMOBILIZER>->
+ Add VECTRA(2004-08) option
in <4-IMMOBILIZER>->
+ Add ARRIZO7,
ARRIZO-M7 options
in <5-DASHBORAD>->
+ Add CHANGAN-STAR-9,
CS75(2014),
RUIXING options
in <5-DASHBORAD>->
+ Add MONDEO(2004-07) option
in <5-DASHBORAD>->
+ Add YINGLUN(2012) option
in <5-DASHBORAD>->
+ Add HONDA(2014-) option
in <5-DASHBORAD>->
-------------------------------------
v4.4.5 (2016-05-25)
* This version DON't need update
firmware
* Fix some bugs
* Fix MC9S12XE seires write
P-FLASH bug
(write BMW FRM bug)
+ Add VVDI PROG USER MUNUAL in
Doc folder
+ Add 12V power output status in
software
+ Add MC9S08LG16_UNSECURED,
MC9S08LG32_UNSECURED,
MC9S08MP12_UNSECURED,
MC9S08MP16_UNSECURED,
MC9S08SC4_UNSECURED,
MC9S08SG4_UNSECURED,
MC9S08SG8_UNSECURED,
MC9S08SG16_UNSECURED,
MC9S08SG32_UNSECURED,
MC9S08SF4_UNSECURED,
MC9S08SV8_UNSECURED,
MC9S08SV16_UNSECURED options
in <2-MCU>->
+ Add MC68HC12BC32_UNSECURED,
MC68HC12BE32_UNSECURED,
MC68HC912B32_UNSECURED,
MC68HC912BC32_UNSECURED,
MC68HC912BD32_UNSECURED,
MC912D60_UNSECURED,
MC912D60A_UNSECURED,
MC912DG128_UNSECURED,
MC912DG128A_UNSECURED,
MC68HC912BD32_SECURED,
MC912D60_SECURED,
MC912D60A_SECURED,
MC912DG128_SECURED,
MC912DG128A_SECURED options
in <2-MCU>->

+ Add MC9S12H128_UNSECURED,
MC9S12H256_UNSECURED,
MC9S12H128_SECURED,
MC9S12H256_SECURED options
Mask:(0K78X,1K78X)
MC9S12XF128_UNSECURED,
MC9S12XF256_UNSECURED,
MC9S12XF384_UNSECURED,
MC9S12XF512_UNSECURED,
MC9S12XF128_SECURED,
MC9S12XF256_SECURED,
MC9S12XF384_SECURED,
MC9S12XF512_SECURED options
Mask:(0M64J,1M64J,2M64J)
in <2-MCU>->
+ Add R5F2154XX-RESET-SEC,
R5F21546E,
R5F21547E,
R5F21548E,
R5F2154AE,
R5F2154CE,
R5F21546F,
R5F21547F,
R5F21548F,
R5F2154AF,
R5F2154CF,
R5F21546G,
R5F21547G,
R5F21548G,
R5F2154AG,
R5F2154CG,
R5F21546H,
R5F21547H,
R5F21548H,
R5F2154AH,
R5F2154CH options
in <2-MCU>->
+ Add D70F3416,
D70F3417,
D70F3421,
D70F3422,
D70F3423,
D70F3424,
D70F3425,
D70F3426,
D70F3427,
D70F3433,
D70F3610,
D70F3611,
D70F3612,
D70F3613,
D70F3614,
D70F3615,
D70F3616,
D70F3617,
D70F3618,
D70F3619,
D70F3620,
D70F3621,
D70F3622,
D70F3624,
D70F3628,
D70F3634 options
in <2-MCU>->
+ Add BCM2(D70F3379),
BCM2(D70F3381/3634) options
in <4-IMMOBILIZER>->
+ Add BCM2(D70F3379),
BCM2(D70F3381/3634) options
in <4-IMMOBILIZER>->
+ Add EXCELLE(2010),
EXCELLE(2013-15),
GL8-FIRSTLAND(2007),
LACROSSE(2008) options
in <5-DASHBORAD>->
+ Add YUEXIANG(2014) option
in <5-DASHBORAD>->
+ Add FOCUS(2005),
MONDEO-CHIA-X(2009),
S-MAX(2008) options
in <5-DASHBORAD>->
+ Add LOBO(2008) option
in <5-DASHBORAD>->
+ Add FAMILY(2011-13) option
in <5-DASHBORAD>->
+ Add S-SEIRES option
in <5-DASHBORAD>->
+ Add JINBEI(2015) option
in <5-DASHBORAD>->
+ Add LANDWIND-X8 option
in <5-DASHBORAD>->
+ Add XC60(2016) option
in <5-DASHBORAD>->
+ Add FSV(2010-) option
in <5-DASHBORAD>->
+ Add SR7 option
in <5-DASHBORAD>->

VVDIProg V4.4.4 Update (2016-04-25)
* VVDI PROG v4.4.4 doesn’t need firmware update
* Fix some bugs
* Change some prompt information
* Fix some errors when writing some MC9S12 series EEPROMs
+ Add update information when the new software is being update
+ Add the Frequency button in MC9S12 seires UNSECURED version;
support manually set frequency, search the right frequency from
MC9S12_BADURATE.cfg in the data folder and also support adding the frequency parameter
+ Add Frequency button in RENESAS-V850 series:
Support manually set frequency, search the right frequency from
V850_BADURATE.cfg in the data folder and also support adding the frequency parameter
+ Add Frequency button in RENESAS-R5F61XXX series:
Support manually set frequency, search the right frequency from
R5F61XXX_BADURATE.cfg in the data folder and also support adding the frequency parameter
+ Add the following options in <2-MCU>->
MC9S08AC8_UNSECURED,
MC9S08AC16_UNSECURED,
MC9S08AC32_UNSECURED,
MC9S08AC48_UNSECURED,
MC9S08AC60_UNSECURED,
MC9S08AC96_UNSECURED,
MC9S08AC128_UNSECURED,
MC9S08AW8_UNSECURED,
MC9S08AW16_UNSECURED,
MC9S08AW32_UNSECURED,
MC9S08AW48_UNSECURED,
MC9S08AW60_UNSECURED,
MC9S08DV16_UNSECURED,
MC9S08DV32_UNSECURED,
MC9S08DV48_UNSECURED,
MC9S08DV60_UNSECURED,
MC9S08DV96_UNSECURED,
MC9S08DV128_UNSECURED,
MC9S08DZ16_UNSECURED,
MC9S08DZ32_UNSECURED,
MC9S08DZ48_UNSECURED,
MC9S08DZ60_UNSECURED,
MC9S08DZ96_UNSECURED,
MC9S08DZ128_UNSECURED,
MC9S08EL16_UNSECURED,
MC9S08EL32_UNSECURED,
MC9S08FL8_UNSECURED,
MC9S08FL16_UNSECURED,
MC9S08GB32_UNSECURED,
MC9S08GB60_UNSECURED,
MC9S08GT16_UNSECURED,
MC9S08GT32_UNSECURED,
MC9S08GT60_UNSECURED,
MC9S08JS8_UNSECURED,
MC9S08JS16_UNSECURED,
MC9S08QA2_UNSECURED,
MC9S08QA4_UNSECURED,
MC9S08QD2_UNSECURED,
MC9S08QD4_UNSECURED,
MC9S08QG4_UNSECURED,
MC9S08QG8_UNSECURED,
MC9S08SE4_UNSECURED,
MC9S08SE8_UNSECURED,
MC9S08SH4_UNSECURED,
MC9S08SH8_UNSECURED,
MC9S08SL8_UNSECURED,
MC9S08SL16_UNSECURED
+ Add R5F61723 in <2-MCU>->
+ Add QUADROCYCLE(2011) in <3-ECU>->
+ Add H2-BCM in <4-IMMOBILIZER>->
+ Add Changan BENBEN,S35,JINNIUXING,YUEXIANG in <5-DASHBORAD>->
+ Add CAPTIVA(2008) in <5-DASHBORAD>->
+ Add VENUCIA-R50(2014),XIAOKANG(2014) in <5-DASHBORAD>->
+ Add BESTURN-B50,BESTURN-B90(2014),BESTURN-X80(2013),
VITA(2008) in <5-DASHBORAD>->
+ Add FOCUS(09-10) in <5-DASHBORAD>->
+ Add C30(2010) in <5-DASHBORAD>->
+ Add S5 in <5-DASHBORAD>->
+ Add LUXGEN in <5-DASHBORAD>->
+ Add QASHQAI(2011) in <5-DASHBORAD>->
+ Add BAOJUN730(2015), ROEWE550,SGMW-WULINGZHIGUANG in <5-DASHBORAD>->
+ Add S40(2006-08), S40(2010), XC60(2012) in <5-DASHBORAD>->
+ Add V5 in <5-DASHBORAD>->
+ Add Z300(2013) in <5-DASHBORAD>->
+ Add ISM-W221,LU-W221,SAM-W221 in <7-OTHER>->
+ Add RFA in <7-OTHER>->
+ Add PASSAT-B6-PBCM in <7-OTHER>->

VVDIProg V4.4.3 (2016-03-31)
* This version DON't need update firmware
+ Add R5F61725 option
in <2-MCU>->
+ Add MC9S12HZ128_UNSECURED,
MC9S12HZ256_UNSECURED,
MC9S12KG128_UNSECURED,
MC9S12KG256_UNSECURED,
MC9S12KT128_UNSECURED,
MC9S12KT256_UNSECURED,
MC9S12XEA128_UNSECURED,
MC9S12XEG128_UNSECURED,
MC9S12XEA256_UNSECURED,
MC9S12XEG256_UNSECURED,
MC9S12XET256_UNSECURED,
MC9S12XEG384_UNSECURED,
MC9S12XEQ384_UNSECURED,
MC9S12XES384_UNSECURED,
MC9S12XEQ512_UNSECURED,
MC9S12XET512_UNSECURED,
MC9S12XEP768_UNSECURED,
MC9S12XEP100_UNSECURED,
MC9S12XHZ256_UNSECURED,
MC9S12XHZ384_UNSECURED,
MC9S12XHZ512_UNSECURED,
MC9S12HZ128_SECURED,
MC9S12HZ256_SECURED,
MC9S12KG128_SECURED,
MC9S12KG256_SECURED,
MC9S12KT128_SECURED,
MC9S12KT256_SECURED,
MC9S12XEA128_SECURED,
MC9S12XEG128_SECURED,
MC9S12XEA256_SECURED,
MC9S12XEG256_SECURED,
MC9S12XET256_SECURED,
MC9S12XEG384_SECURED,
MC9S12XEQ384_SECURED,
MC9S12XES384_SECURED,
MC9S12XEQ512_SECURED,
MC9S12XET512_SECURED,
MC9S12XEP768_SECURED,
MC9S12XEP100_SECURED,
MC9S12XHZ256_SECURED,
MC9S12XHZ384_SECURED,
MC9S12XHZ512_SECURED diagram
in <2-MCU>->
+ Add SGMW-HONGGUANG option
in <5-DASHBORAD>->
+ Add 315M-IN-CIRCUIT,
315M-CHIP,
434M-IN-CIRCUIT,
434M-CHIP,
868M-IN-CIRCUIT,
868M-CHIP options in
<6-REMOTE>->
SK177 VVDIProg V4.4.0 (2016-03-07)
* This version DON't need update
firmware
* Add the Download Link in Upgrade
option, click it and get the last
version software!!!
* Change the diagram interface
+ Add MC9S12C32_SECURED,
MC9S12C64_SECURED,
MC9S12C96_SECURED,
MC9S12C128_SECURED
in <2-MCU>->
Mask:(0M66G,1M34C,1L45J,2L45J)
+ Add EIZ-W164(ST12),
EIZ-W215(ST12),
EIZ-W221(ST12),
EIZ-VANEO(ST12) options
in <4-IMMOBILIZER>->
+ Add CAPTIVA(2011) option in
<5-DASHBORAD>->
+ Add BAOJUN330 option in
<5-DASHBORAD>->
+ Add C70(2011) option in
<5-DASHBORAD>->
 
SK177 VVDI Prog v4.3.1 (2016-01-27)
* This version DON't need update
firmware
+ Add MC9S12GN16_UNSECURED,
MC9S12GNA16_UNSECURED,
MC9S12GN32_UNSECURED,
MC9S12GNA32_UNSECURED,
MC9S12G48_UNSECURED,
MC9S12GA48_UNSECURED,
MC9S12GN48_UNSECURED,
MC9S12G64_UNSECURED,
MC9S12GA64_UNSECURED,
MC9S12G96_UNSECURED,
MC9S12GA96_UNSECURED,
MC9S12G128_UNSECURED,
MC9S12GA128_UNSECURED,
MC9S12G192_UNSECURED,
MC9S12GA192_UNSECURED,
MC9S12G240_UNSECURED,
MC9S12GA240_UNSECURED options
Mask:(0N95B,0N51A,0N75C,1N75C,
0N48A,1N48A)
MC9S12HA32_UNSECURED,
MC9S12HA48_UNSECURED,
MC9S12HA64_UNSECURED,
MC9S12HY32_UNSECURED,
MC9S12HY48_UNSECURED,
MC9S12HY64_UNSECURED options
Mask:(0M34S)
MC9S12P32_UNSECURED,
MC9S12P64_UNSECURED,
MC9S12P96_UNSECURED,
MC9S12P128_UNSECURED options
Mask:(0M01N)
MC9S12XEA128_UNSECURED,
MC9S12XEG128_UNSECURED,
MC9S12XEA128_SECURED,
MC9S12XEG128_SECURED options
Mask:(1M53J,2M53J,0N36H,1N36H)
MC9S12XHY128_UNSECURED,
MC9S12XHY256_UNSECURED options
Mask:(0M23Y)
MC9S12XS64_UNSECURED,
MC9S12XS128_UNSECURED,
MC9S12XS256_UNSECURED options
Mask:(0M04M,1M04M,0M05M)
in <2-MCU>->
+ Add MC9S12XE_UNLOCK option
in <2-MCU>->
(Backup all data before use it)
+ Add ME20U2-XET256-BACKUP,
ME20U2-XET512-BACKUP,
MT22-XEP768-BACKUP,
MT60-XEP768-BACKUP options
in <3-ECU>->
+ Add the 12V power adaptor status
in information dialog
VVDI Pro V4.3.0(2016-01-16) Newly Update
* This version DON't need update
firmware
+ Add MC9S12XHZ256_UNSECURED,
MC9S12XHZ384_UNSECURED,
MC9S12XHZ512_UNSECURED,
MC9S12XHZ256_SECURED,
MC9S12XHZ384_SECURED,
MC9S12XHZ512_SECURED options
in <4-IMMOBILIZER>->
Mask:(0M80F,1M80F)
+ Add [V850ES/Sx3]series:
D70F3333,
D70F3334,
D70F3335,
D70F3336,
D70F3340,
D70F3341,
D70F3342,
D70F3343,
D70F3350,
D70F3351,
D70F3352,
D70F3353,
D70F3344,
D70F3345,
D70F3346,
D70F3347,
D70F3348,
D70F3354,
D70F3355,
D70F3356,
D70F3357,
D70F3358,
D70F3364,
D70F3365,
D70F3366,
D70F3367,
D70F3368 options
[V850ES/Fx3]series:
D70F3370A,
D70F3371,
D70F3372,
D70F3373,
D70F3374,
D70F3375,
D70F3376A,
D70F3377A,
D70F3378,
D70F3379,
D70F3380,
D70F3381,
D70F3382,
D70F3383,
D70F3384,
D70F3385 options
[V850ES/Hx2]series:
D70F3700,
D70F3701,
D70F3702,
D70F3703,
D70F3704,
D70F3706,
D70F3707,
D70F3709,
D70F3710,
D70F3711,
D70F3712 options
[V850E2/Fx4-G]series:
D70F4177,
D70F4178,
D70F4179,
D70F4180 options
in <2-MCU>->
+ Add EIZ-W220(ST12)
in <4-IMMOBILIZER>->
+ Add ORIGINAL-315M-IN-CIRCUIT,
ORIGINAL-315M-CHIP,
ORIGINAL-868M-IN-CIRCUIT,
ORIGINAL-868M-CHIP options in
<6-REMOTE>->
* Modify the EXCELLE(2013--)BCM,
EXCELLE-GT(2013--)BCM,
EXCELLE(2014) options in
<4-IMMOBILIZER>->:
Remove the D-FLASH option
* Modify the CAS4-5M48H-R/W/UNLOCK,
CAS4-1N35H-R/W/UNLOCK options
in <4-IMMOBILIZER>->:
Autoset the D-FLASH partition
size as 32K while writing the
D-FLASH data
 
VVDI Prog v4.1.4 (2015-12-11)
* This version DON't need update
firmware
* Fix when the partition size
information error in MC9S12XE
series chips manual set the
partition size function error
problem



VVDI PROG Programmer v4.1.3 (2015-12-11)
* This version DON't need update
firmware
+ Add PA28F200B5T(PSOP44),
PA28F200B5B(PSOP44),
PA28F200BVT(PSOP44),
PA28F200BVB(PSOP44),
PA28F200BXT(PSOP44),
PA28F200BXB(PSOP44),
PA28F400B5T(PSOP44),
PA28F400B5B(PSOP44),
PA28F400BVT(PSOP44),
PA28F400BVB(PSOP44),
PA28F400BXT(PSOP44),
PA28F400BXB(PSOP44),
PA28F800B5T(PSOP44),
PA28F800B5B(PSOP44),
PA28F800BVT(PSOP44),
PA28F800BVB(PSOP44),
PA28F800BXT(PSOP44),
PA28F800BXB(PSOP44),
TB28F200B5T(PSOP44),
TB28F200B5B(PSOP44),
TB28F200BVT(PSOP44),
TB28F200BVB(PSOP44),
TB28F200BXT(PSOP44),
TB28F200BXB(PSOP44),
TB28F400B5T(PSOP44),
TB28F400B5B(PSOP44),
TB28F400BVT(PSOP44),
TB28F400BVB(PSOP44),
TB28F400BXT(PSOP44),
TB28F400BXB(PSOP44),
TB28F800B5T(PSOP44),
TB28F800B5B(PSOP44),
TB28F800BVT(PSOP44),
TB28F800BVB(PSOP44),
TB28F800BXT(PSOP44),
TB28F800BXB(PSOP44)options
in <1-EEPROM&FLASH>->
(Need the TB28FXXX adapter)
+ Add XP8000E option in
<3-ECU>->
+ Add BCM-XEQ384 option in
<4-IMMOBILIZER>->
+ Add Laguna BCM(2010--)option in
<4-IMMOBILIZER>->
+ Add EXCELLE(2011--)(3L16Y)option
in <5-DASHBORAD>->
* Fix the MC9S12XE series
"read partition" software bug
* Change the default connection
diagram size to 50%

VVDI PROG Programmer v4.12 (2015-11-27)
* This version DON't need update
firmware
+ Add MC9S12A64_UNSECURED
MC9S12D64_UNSECURED
MC9S12DJ64_UNSECURED
MC9S12A128_UNSECURED
MC9S12DB128_UNSECURED
MC9S12DG128_UNSECURED
MC9S12DJ128_UNSECURED
MC9S12DT128_UNSECURED
MC9S12HZ128_UNSECURED
MC9S12KG128_UNSECURED
MC9S12KT128_UNSECURED
MC9S12A256_UNSECURED
MC9S12DG256_UNSECURED
MC9S12DJ256_UNSECURED
MC9S12DP256_UNSECURED
MC9S12DT256_UNSECURED
MC9S12HZ256_UNSECURED
MC9S12KG256_UNSECURED
MC9S12KT256_UNSECURED
MC9S12XA128_UNSECURED
MC9S12XB128_UNSECURED
MC9S12XD128_UNSECURED
MC9S12XDG128_UNSECURED
MC9S12XA256_UNSECURED
MC9S12XB256_UNSECURED
MC9S12XD256_UNSECURED
MC9S12XDQ256_UNSECURED
MC9S12XDT256_UNSECURED
MC9S12XDT384_UNSECURED
MC9S12XDA512_UNSECURED
MC9S12XDP512_UNSECURED
MC9S12XDT512_UNSECURED options
in <2-MCU>->, support
auto detect the clk frequency,
read/write the unsecured chip
with standard BDM interface
+ Add MC9S12XA128,MC9S12XB128,
MC9S12XD128,MC9S12XDG128 options
in <2-MCU>->
Mask:(0M42E,1M42E,2M42E)
+ Add MC9S12XA256,MC9S12XB256,
MC9S12XD256,MC9S12XDQ256,
MC9S12XDT256 options
in <2-MCU>->
Mask:(0M84E,1M84E)
+ Add BCM-XDT384,BCM-XEG384 options
in <4-IMMOBILIZER>->
+ Add BCM-XDT384,BCM-XEG384 options
in <4-IMMOBILIZER>->
+ Add BCM-XDT384,BCM-XEG384 options
in <4-IMMOBILIZER>->
+ Add EXCELLE(2013--)BCM,
EXCELLE-GT(2013--)BCM options
in <4-IMMOBILIZER>->
+ Add MG7 option
in <4-IMMOBILIZER>->
+ Add EIZ-SPRINTER(2015--) option
in <4-IMMOBILIZER>->
+ Add ZAFIRA-DG128,ASTRA-DG128
options in <4-IMMOBILIZER>->
-------------------------------------
VVDI PROG Auto key Programmer v4.1.1 (2015-11-19)
* This version DON't need update
firmware
+ Add Delphi ECU MT20U2-2L33V
option in <3-ECU>->
+ Add NEW SAIL BCM option in
<4-IMMOBILIZER>->
+ Add ROEWE750 immobox option in
<4-IMMOBILIZER>->
+ Add EXCELLE 2014 option in
<5-DASHBORAD>->
* Fix display problem while check
failure
-------------------------------------
VVDI PROG Auto key Programmer v4.1.0 (2015-11-13)
* This version DON't need update
firmware
+ Add MC9S12XEA256_UNSECURED
MC9S12XEG256_UNSECURED
MC9S12XET256_UNSECURED
MC9S12XEG384_UNSECURED
MC9S12XEQ384_UNSECURED
MC9S12XES384_UNSECURED
MC9S12XEQ512_UNSECURED
MC9S12XET512_UNSECURED
MC9S12XEP768_UNSECURED
MC9S12XEP100_UNSECURED options
in <2-MCU>->, support
auto detect the clk frequency,
read/write the unsecured chip
with standard BDM interface
+ Add Delphi ECU ME20U2-XET256,
ME20U2-XET512 options in
<3-ECU>->
+ Add Delphi ECU MT22-XEP768,
MT60-XEP768 options in
<3-ECU>->
+ Add CAS3-2K79X,CAS3-0L01Y,
CAS3+(0L15Y),CAS3+(0M23S) options
in <4-IMMOBILIZER>->
* Fix SIEMENS VDO IMMOBILIZER
read error problem

VVDI PROG Auto key Programmer V3.8.0 Update (2015-09-22):
 
* This version DON't need update firmware
+ Add 2L33V, 3L15Y R/W function (The only equipment can R/W except original equipment)
+ Add MC9S12HZ128, MC9S12HZ256,
MC9S12KG128, MC9S12KG256,
MC9S12KT128, MC9S12KT256 options
in <2-MCU>-->
Mask:(2L16Y,3L16Y,0L74N,1L74N,
2L14N,3L74N,4L74N,5L74N,0L33V,
1L33V,2L33V,3L33V,0M17D)
+ Add Delphi MT20UED option
in <3-ECU>-->
+ Add SIEMENS VDO IMMOBILIZER
(0L72A_E/1K59H_E)in
<4-IMMOBILIZER>options
+ Add "CAS4-1N35H-BACKUP",
"CAS4-1N35H-R/W" options in
<4-IMMOBILIZER>-->
+ Add CHERY E5 option in
<5-DASHBORAD>
+ Add tips about erase confirmation
* Change Great Wall Delphi immobox
connection diagram
* Fix the English Version display
problem
VVDI PROG Auto key Programmer V3.6.0 Update (2015-09-15):
* This version DON't need update firmware
+ Add SIEMENS/STEC IMMOBILIZER in
<4-IMMOBILIZER>
(0L07H/0L59X/0L72A/3K59G)
+ Add BMW EWS4.X in <4-IMMOBILIZER>
+ Add FORD BCM 7S7T in
<4-IMMOBILIZER>
+ Add MC9S12XDT384 option in
<2-MCU>->, support
(0L86D/1L86D/2L86D/3L86D/4L86D/
0M89C) options
* Fix MC9S12xx64 Crack/Read/Write function



Main Feature:


1. The built-in update software allows user to update VVDIProg firmware timely.
2. High-speed USB communication interface enable the software automatically connect.
3. Smart operation mode: the possible causes of error will be listed
4. Reserve ports: for future update.
5. The self-test function enable you check if the machine works well.
6. Can supply power via USB cable, the software will automatically prompt if the external USB power supply is needed.

Update Information:
VVDI PROG key Programmer V3.4.0 Update (2015-09-10):
* This version DON't need update firmware
+ Add Porsche BCM (1L15Y/2M25J/5M48H) options
+ Add MC9S12XEQ512,MC9S12XET512 options in <2-MCU>-->Motorola
+ Add BENZ EIS-W203 in <4-IMMOBILIZER>
* Fix some display BUGs in EnglishVersion
* Change the name of upgrade button as "Start Firmware Upgrade"
* Change the Voltage name as "VCC" "VPP"

Adapters Detailed Description:

16Pin Locking Socket
Read the common EEPROOM, note: please insert the chip by following the below picture.

1.3.2 MCU Reflash cable
Used to program MCU on board

1.3.3 ECU Reflash cable
Used to program ECU

1.3.4 MC9S12 Reflash cable
Used to program MC9S12 series chip




2. Supported chip list

2.1 EEPROM
Manufactures Types Support Remark
ATMEL AT24CXX R  
AT25XXX R  
AT93CX6 R  
BOSCH B3XX R  
B4XX R  
B5XX R  
B58XXX R  
CATALYST CAT24CXX R  
CAT24WXX R  
CAT93CX6[A] R  
EXEL XL[S]24CXX R  
  XL[S]93CX6 R  
FAIRCHILD FM24CXX R  
NM24CXX R  
NM93CX6 R  
GRUNDIG GRXX R  
HOLTEK HT93CX6 R  
MICROCHIP 24AAXX R  
24[L]CXX R  
93[L]CX6 R  
93AAX6 R  
MITSUBISHI M6M800X1 R  
SEIKO S-24CXX R  
S-93CX6 R  
ST D80/D160 R Can erase the first 32 bytes
M35080 R Can erase the first 32 bytes
NEC M24CXX R  
ST ST24CXX R  
ST24EXX R  
ST24WXX R  
ST25CXX R  
ST25EXX R  
ST95P0X R  
Note: R means the type is supported, £ means the type will be supported in the future

2.2 MCU
Manufactures Types Support Remark
MOTOROLA MC9S12XEP R Can automatically determine D-FLASH/EEE space
MC9S12XA R  
MC9S12XB R  
MC9S12XD R  
MC9S12XDT R  
MC9S12XDP R  
MC9S12XDQ R  
MC9S12DG R  
MC9S12DT R  
MC9S12P R  
MC9S12H R  
MC9S12HY £  
MC9S12HA £  
MC9S12HZ £  
MC9S12XHZ £  
MC9S12B £  
MC9S12GC £  
MC9S12XS £  
MC9S12K £  
MC9S12Q £  
MC9S12C £  
MC9S12P £  
MC9HC(9)08 £  
ATMEL ATTINY £  
ATMEGEA £  
NEC uPD70F £  
ST TMS370 £  

Note: R means the type is supported £ means the type will be supported in the future.

2.3 ECU
Manufactures Types Support Remark
VAG MED17.1-TC1796 £  
MED17.11-TC1796 £  
VAG MEG17.5-TC1766 £  
VAG MED17.5.1-TC1796 £  
VAG MED17.5.2-TC1767 £  
VAG MED17.5.5-TC1766 £  
VAG MED17.5.20-TC1766 £  
VAG EDC17 CP14/CP20-TC1796 £  
VAG EDC17 CP04-TC1796 £  
VAG EDC17 C46-TC1767 £  
VAG EDC17 CP24-TC1796 £  
VAG EDC17 CP44-TC1797 £  
VAG EDC17 U01-TC1766 £  
VAG EDC17 U05-TC1796 £  
VAG/Porsche Siemens Continental SDI 3-
TC1796
£  
BMW MEVD172(N55) R  
MEVD172P(N20) R  
MEVD172G(N55) R  
MEVD172S(N55) R  
MEVD1724(N20) R  
MEVD1725(N13) R  
MEVD1726(N55) R  
MEVD1729(N20) R  
MEVD1728(N63/S63) R  
Note: R means the type is supported £ means the type will be supported in the future.



Package including:
 
1pc x Programmer multiplexer
1pc x Square USB cable
1pc x SOP16 test socket
1pc x 16pin converter (Support SOP/SOT/SSOP)
1pc x MCU reflash cable
1pc x ECU reflash cable
1pc x MC9S12 reflash cable (Used to program MC9S12 series chip)
1pc x 12V3A power adapter (High quality power supply)


Customer share:

This is the picture for VVDI Pro read ISN code

Go to Buy: Original V4.7.8 Xhorse VVDI PROG Programmer

Tags: VVDI PROG, vvdi , vvdi prog programmer
Prev: VAG K + может командовать бесплатной доставкой
Next: VCS интерфейс сканера связи V1.45